FilmTec™ BW30 PRO-400

High Rejection and High Performance Industry-Standard Brackish Water Reverse Osmosis Membrane Element

Category: Tüm Ürünler

Description

Keep elements moist at all times after initial wetting
For successful operation of Reverse Osmosis (RO) and Nanofiltration (NF) membrane systems, the operation must follow the guidelines provided in the FilmTec™ Reverse Osmosis / Nanofiltration Elements Operation Excellence and Limiting Conditions Tech Fact.

To prevent biological growth during prolonged system shutdowns, it is recommended that membrane elements be immersed in a preservative solution
The customer is fully responsible for the effects of incompatible chemicals and lubricants on elements
Permeate obtained from the first hour of operation should be discarded.
The use of this product in and of itself does not necessarily guarantee the removal of cysts and pathogens from water. Effective cyst and pathogen reduction is dependent on the complete system design and on the operation and maintenance of the system.

Operating and Cleaning Limits
Membrane Type	Polyamide Thin-Film Composite
Maximum Operating Temperature	113°F (45°C)
Maximum Operating Pressure	600 psig (41 bar)
Maximum Pressure Drop Per Element Per Pressure Vessel (Minimum 4 Elements)	15 psig (1.0 bar) 50 psig (3.5 bar)
pH Range Continuous Operation Short-Term Cleaning (30 min)	2 – 11 1 – 13
Maximum Feed Flow	75 gpm (17 m3/hr)
Maximum Feed Silt Density Index (SDI	SDI 5
Free Chlorine Tolerance	< 0.1 ppm

Reviews 0

There are no reviews yet.

Be the first to review “FilmTec™ BW30 PRO-400”